| 彩钢板屋面施工方法 |
| 添加时间：2017/10/19 15:14:20 浏览次数： |
| 1、材料进场 1, the material approach （1）材料进场，厂商应附原厂出厂材质检验证明。 (1) the materials enter the market, and the manufacturer shall attach the manufacturer's materials inspection certificate. （2）检验成型浪板及檩条的规格、尺寸、厚度。 (2) the specification, size and thickness of the moulded wave plates and purlines. （3）检验各式收边料规格、尺寸、厚度。 (3) to inspect the specifications, dimensions and thickness of various types of loading. （4）检验零配件（自攻螺丝、垫片、止水胶等）。 (4) test spare parts (self-tapping, gasket, stop water glue etc.). （5）彩色钢浪板外观不得有拖拉伤痕、色斑，表面膜层磨损、扭曲、污染、色差、翘角等现象。 (5) the appearance of the colored steel wave plates shall not be caused by drag, color, surface layer wear, distortion, pollution, color difference, etc. （6）材料进场时，应堆放在甲方指定之区域，同时乙方自行负责该部分材料的安全措施，材料应有适当之包装，以免损毁。 (6) material comes into play, should be piled up in the area designated by the party a, party b shall responsible for the security measures of the part of the material at the same time, proper packaging materials, so as to avoid damage. 2、吊运 2, the lifting （1）材料进场设置指定地点前，须分批、分类另放，不能立即使用时应整齐堆放并以帆布或胶布覆盖。 (1) the materials shall be arranged in batches, in batches, and shall not be used immediately, and shall be covered with canvas or tape. （2）地面堆放材料时，为保持干燥必须铺设枕木（枕木高6公分以上），材料不得接触地面，枕木间距不得大于3公尺。 (2) the ground stacking materials, to keep dry must laid sleepers (sleepers more than 6 cm high), material can not contact with the ground, sleeper spacing shall not be greater than 3 meters. （3）材料吊运至屋架前，应以钢带捆扎束紧。 (3) when the material is carried to the roof, it should be tied with steel straps. |
| 上一页 彩钢知识，知多少？ |
| 下一页 彩钢板的特点性能 |
Copyright © 技术支持：遨游网络